工程实践
LED Strip Installation Guide for Commercial & Architectural Projects
2026年6月30日
Installation best practices for LED strip — profiles, thermal path, drivers, terminations, and IP sealing for export projects.
LED Strip Installation Guide
Quick Answer: Reliable LED strip installation uses aluminum profiles for heat management, drivers sized to 80% load in accessible locations, soldered or sealed connections per IP rating, and commissioning that verifies CCT uniformity across feeds.
Preparation
Confirm BOM revision, cut marks, max run length, and driver voltage class before mounting. Pre-test a sample run at full length.
Mounting & Thermal Management
Mount strip in aluminum extrusion for commercial life. Air gap and diffuser selection affect delivered lumens and glare.
Electrical
- Observe polarity and max run per feed - Place drivers for maintenance — not above sealed ceilings without access - Label circuits matching as-built drawings
Connections
IP Zones
Re-seal every cut on waterproof strip. Use adhesive and mechanical retention suited to substrate temperature cycles.
Q: Can installers mix brands on one driver? A: Avoid unless engineer-approved — voltage drop and dimming curves differ.
Q: How to test after install? A: Full-load burn-in per commissioning plan; photograph CCT consistency at night.
Conclusion
Installation quality determines field life more than catalog LED hours. Align installer brief with manufacturer termination instructions.
About Mihoray
Mihoray is a professional LED strip and neon flex manufacturer based in China, providing OEM and ODM lighting solutions for commercial, hospitality, architectural and landscape lighting projects worldwide.